Grammar mistakes

README.md

@@ -1,5 +1,5 @@
-This repository contains a podman image whichs contains all necessary tools to generate and flash bitstream file from a SystemVerilog program.
-It is build for the xilinx zybo zynq7 `xc7z010` card, but it can probably be easily edited to support another card.
+This repository contains a podman image whichs includes all the necessary tools to generate and flash a bitstream file from a SystemVerilog program.
+It is built for the Xilinx Zybo Zynq7 `xc7z010` card, but it can probably be easily adapted to support another board.
 
 # Installation
 
@@ -7,7 +7,7 @@ You will need [podman](https://podman.io/) to run the image.
 
 ## Use the pre-built image
 
-You can directly use the pre-build image present in the repo
+You can directly use the pre-built image available in the repository :
 
 ```bash
 zstd -d fmn.tar.zst
@@ -16,27 +16,27 @@ podman load --input fmn.tar
 
 ## Build the image from source
 
-You can build the image yourself by using this command:
+You can build the image yourself by using this command :
 
 ```bash
 podman build -t fmn_alpine .
 ```
 
-It will first create an image which will build every tools, and then create the final image containing only needed binaries and libraries.
+It will first create an image that builds all the tools, and then generate the final image containing only the necessary binaries and libraries.
 
-For information, it takes around 5.63GB space and 10 minutes to build on my device.
+For reference, it takes about 5.63GB of space and 10 minutes to build on my machine.
 
 # Tools
 
-- [sv2v](https://github.com/zachjs/sv2v) : Convert SystemVerilog to Verilog.
-- [yosys](https://github.com/YosysHQ/yosys) : Do RTL synthesis from verilog files.
+- [sv2v](https://github.com/zachjs/sv2v) : Converts SystemVerilog to Verilog.
+- [yosys](https://github.com/YosysHQ/yosys) : Performs RTL synthesis from verilog files.
 - [nextpnr-himbaechel](https://github.com/YosysHQ/nextpnr) : placing and routing tool.
-- [fasm2frames](https://github.com/f4pga/prjxray) : Convert fasm files to frames files.
-- [xc7frames2bit](https://github.com/f4pga/prjxray) : Convert frames files to bitstream.
-- [openFPGALoader](https://github.com/trabucayre/openFPGALoader) : Flash a bitstream on a FPGA card.
+- [fasm2frames](https://github.com/f4pga/prjxray) : Converts fasm files to frames files.
+- [xc7frames2bit](https://github.com/f4pga/prjxray) : Converts frames files to bitstream.
+- [openFPGALoader](https://github.com/trabucayre/openFPGALoader) : Flashes a bitstream onto an FPGA card.
 
-The image also contains some [databases](https://github.com/f4pga/prjxray-db) needed for prjxray tools to work.
+The image also includes some [databases](https://github.com/f4pga/prjxray-db) required for the prjxray tools to function.
 
 # Usage
 
-See the small [example](./example/).
+See the provided [example](./example/).